What is Selective Catalytic Reduction (SCR) Catalyst?

Selective catalytic reduction is a catalytic reaction which uses ammonia to reduce oxides of nitrogen (NOx) into harmless nitrogen (N2) and water. Because of this function, the SCR catalyst is sometimes referred to as a NOx catalyst in the industry. It has been used in many industrial facilities including power plants and chemical refineries to reduce NOx emissions since the 1980’s. It has been used in automotive applications since the mid 2000’s to reduce NOx emissions from heavy duty and light duty diesel vehicles.

Industrial Selective Catalytic Reduction Catalyst

The active component of the catalyst itself can be one of several different materials; vanadium pentoxide is frequently used in industrial settings while copper and iron zeolites are frequently used in automotive applications. Different materials are used because of differences in operating conditions, temperatures, and resistance to impurities in the fuel and environment.

On industrial installations, SCR catalysts are installed along with an Ammonia Injection Grid, or AIG for short. The AIG sprays ammonia, typically stored as aqueous ammonia, anhydrous ammonia, or a urea solution, into the exhaust stream. The ammonia adsorbs onto the SCR catalyst, where it reacts with NOx and oxygen to form nitrogen and water. In a vehicle, onboard urea, known as Diesel Exhaust Fluid (DEF) or AdBlue, is sprayed into exhaust gas upstream of the catalyst brick and diffused using a mixer to optimize airflow and ensure thorough vaporization and even distribution in the exhaust prior to entering the catalyst.

If an Industrial SCR catalyst NOx removal efficiency declines or ammonia usage increases significantly, it could signal a serious problem with the catalyst and inspection and performance testing by a qualified company should be scheduled. See Environex’s SCR System Evaluation page for more information on our services.

In an industrial facility, the AIG may need to be tuned periodically to ensure proper distribution of ammonia into the SCR catalyst. If there are areas of high and low ammonia flow entering the system, the catalyst will not be used effectively and higher NOx emissions and ammonia may result. See AIG Tuning for more information.

Leave a Reply